The combination Orbital and Welding specifies a process by which an arc travels circumferentially around a work piece (usually a tube or pipe).
The concept Orbital Welding is basically a loosely defined term that is usually used for processed only, where the arc is travels at least 360 degrees around the work piece without interruption.
Consequently, processes, which interrupt the full 360-weld sequence such as for better puddle control (often used for MIG/MAG welding, using the down-hand welding sequence in 2 half-circles), can not truly be called orbital welding.
Orbital Welding Products that will save you time and money. Our selection of machines eliminate labor entensive work saving you time and money, while providing precise quick welds.
Our machine can be used in following industry:
| Model | CFH-45 |
| Material | Carbon steel, Stainless Steel, Titanium Alloy |
| Tube Fitting | Straight tube, Pipe flange, Elbow butt joint; |
| Welding Process | TIG/GTAW (no wire feeding) |
| Tube OD(mm/inch) | 38-114mm |
| Tube Wall Thickness(mm) | ≤3mm |
| Tungsten OD(mm) | 1.6/2.0 |
| Rotating | 360 degree free rotated and Auto reset ;all position welding; |
| Rotation speed(rpm) | 0.3~6 |
| Protective Gas | Argon |
| Cooling | Water |
| Cooling Flow(ml/min) | 1000ml/min |
| Cable Length | 6m or Customized |
| Main Dimension(mm) | |
| Weight(kg) | 6kg |
| Dimension(mm) | 497*230*57 |
Orbital Welding Head CFH-45
Order Information:
| Order Code | K200120 |
| Packing | Flight case |
| Packing Size | 650*400*200mm |
| Packing Weight | 12Kg + 23Kg (Welding Power Source OBT-200) |
| Delivery Time | 3-5 Days after payment |
https://www.youtube.com/watch?v=xgHAmL8MZ-E
